Viewing tab, Printing tab, Cardioperfect workstation – Welch Allyn CardioPerfect Workstation Resting ECG Module - User Manual User Manual
Page 40: Resting ecg module - user manual

CardioPerfect Workstation
Resting ECG Module - User Manual
DIR 80012333 Ver. E
40 / 54
8.2. Viewing tab
In the Viewing tab you can configure the settings that determine how the ECGs will be displayed 
on the screen. 
The Viewing tab contains the following options:
QTc method (Bazett, 
Hodges, Fridericia) 
With this option you can set the method that should be used to 
correct the measured QT. 
AC filter mode
With this option you can set the mode of the AC mains filter.
Appearance
Here, you can specify individual colors for the background, grid
lines, grid dots, trace, begin and end of the QRS complex, the 
markers, the T wave and the font that is used in the ECG. 
Color schemes
This list lets you choose from a number of predefined color 
formats. 
Grid style
From this list you can select the style of the grid in which the ECG 
is displayed. You can either leave out the grid, use lines to 
represent the grid, or display a full grid. 
8.3. Printing tab
In the Printing tab, you can configure automatic printing and selected formats. The Printing tab 
contains the following options: 
Default report templates
From this list of templates, you can select the formats that are 
printed when automatic printing is enabled. These formats are 
also printed when you click Print selected formats in the ECG 
window. 
Grid
From this list, you can select the grid style in which the selected 
formats should be printed. 
Print after recording
If this option is selected, the ECG is automatically printed when 
the recording has finished. Welch Allyn CardioPerfect prints the 
formats that you selected in the Default report templates area. 
Print after interpretation is confirmed
If this option is selected, the ECG is automatically printed when 
the interpretation of the ECG has been confirmed. Welch Allyn 
CardioPerfect prints the formats that you selected in the Default 
report templates area. 
Print calibration pulse
If this option is selected, the calibration pulse will be printed.
