Welch Allyn CardioPerfect Workstation Resting ECG Module - User Manual - Manual (Page 22)

CardioPerfect Workstation
Resting ECG Module - User Manual
DIR 80012333 Ver. E 22 / 54
Measurements view
The Measurements view displays the
measurements that were taken by the
computer. These measurements include the
values for several common parameters, such
as Q, R and S amplitude and ST values. The
amplitudes are expressed in microvolts. The
durations are expressed in milliseconds.
The measurements cannot be edited.
Rhythm view
When you have recorded a rhythm ECG, you
can view the entire ECG in the Rhythm view.
You can use the scroll bar to move through the
ECG.
The Rhythm view displays leads in different
groupings, so that you can easily switch
between the most common groups.
Old rhythm strip
The Old rhythm strip view is only available for
ECGs that were recorded with older versions of
the Workstation software (software from before
2000). It displays the original II V2 rhythm strip.