Welch Allyn 300 Series Vital Signs Monitor - User Manual - Manual (Page 66)

62 Chapter 5 Reviewing Patient Data Welch Allyn Vital Signs Monitor 300 Series
Table Heading
The Table Heading contains some or all of the following column headings (depending on
monitor configuration):
Date
Time
The recording time is printed for each record, in the form hh:mm (using a 24-hour clock),
at the beginning of the first line of the record.
In the illustration below, the first record (21:45) contains systolic and diastolic pressure,
MAP, pulse rate, and SpO2 readings; the second record (21:52) contains systolic and
diastolic pressure, MAP, pulse rate, and temperature; and the third record (22:12) contains
only a temperature reading. When temperature is the only recorded vital sign, the time is
printed on the same row as the temperature reading.
| Time Sys Dia MAP PR SpO2 |
| ---- mmHg ---- BPM % |
| --------------------------------- |
or
| Time Sys Dia MAP PR SpO2 |
| ---- kPa ---- BPM % |
| --------------------------------- |
or
| Time Sys Dia MAP PR |
| ---- kPa ---- BPM % |
| --------------------------------- |
or
| Time Sys Dia MAP PR |
| ---- mmHg ---- BPM % |
| --------------------------------- |
| DD-MMM-YYYY |
| Time Sys Dia MAP PR SpO2 |
| ---- mmHg ---- BPM % |
| --------------------------------- |
| 21:45 125 69

90 72 98 |
| 21:52 125 69

90 72 98 |
| Temp 99.2F NOR/ORL |
| 22:12 Temp 110.0F

NOR/ORL |