Welch Allyn 300 Series Vital Signs Monitor - User Manual - Manual (Page 14)

10 Chapter 2 Setup Welch Allyn Vital Signs Monitor 300 Series
Use the AC power adapter to fully charge the battery before using the monitor. (This can
take up to 12 hours.)
• While the monitor is charging, the AC/charging indicator flashes.
• When the monitor is 90% charged, the AC/charging indicator is steady. To fully
charge the battery, leave the AC power adapter connected for a few more hours.
• After the monitor is fully charged for the first time, the monitor can be powered by the
AC power adapter or by the internal battery.
Caution Fully charge the battery before using the monitor for the first time.
Failure to do so will result in poor battery performance and reduced battery life.
AC Power
Adapter Port