Maintenance instructions, Specifications – Welch Allyn Standard laryngoscope blade assemblies - User Manual User Manual
Page 6

6
Directions for use
Welch Allyn s t a n d a rd laryngoscope blade assemblies
Maintenance instructions
Replace the lamp and/or light assembly (REF: 6904X, 6924X, and 6804X)
CAUTION: Use only lamps specified to ensure proper performance.
Use lamp REF 04700 for: 69041, 2, 69241, 2, 68045, 0, 1, and 68470 blade/light assemblies
Use lamp REF 04800 for: 69043, 4, 69243, 4, and 68042, 3, 4 blade/light assemblies
1. Remove the locking screw by rotating counterclockwise with a standard screwdriver.
2. Pull light assembly away from base of laryngoscope blade and slide distal end out of blade.
3. To replace lamp: Rotate lamp counterclockwise until free and insert a new lamp and tighten.
4. Position new or re-lamped light assembly the reverse order of step 2.
5. Replace locking screw and rotate clockwise until secure.
6. Verify lamp and blade engagement/operation using a known working test handle.
7. Reprocess repaired assembly as appropriate per these instructions.
Figure 2
Specifications
Electrical:
For use with ISO 7376-1 (black code) standard type handles only
For information about electromagnetic compatibility (EMC) see Welch Allyn website:
http://www.welchallyn.com
Operating:
Storage/Transport:
32 F
(0 C)
104 F
(40 C)
-4 F
(-20 C)
120 F
(49 C)
Approvals:
Conforms to ASTM F 965 and ISO-7376-1, IEC/EN 60601-1, IEC/EN 60601-1-2
The CE mark on this product indicates that it has been tested to and conforms
with the provisions noted within the 93/42/EEC Medical Device Directive.
Complies with EMC Framework of Australia
Warranty: One year
Service Information:
For Technical Support or to obtain information about any Welch Allyn product, contact
Welch Allyn Technical Support: www.welchallyn.com/support.
Welch Allyn, Inc.
4341 State Street Road
Skaneateles Falls, NY 13153-0220 USA
www.welchallyn.com
Authorized European Representative Address:
Regulatory Affairs Representative
Welch Allyn, Limited
Navan Business Park
Dublin Road
Navan, County Meath, Republic of Ireland