Welch Allyn Audioscope 3 Portable Screening Audiometer - User Manual - Manual (Page 21)

1. Choose a location for the charging stand that is within five feet
(1.5m) of an electrical outlet.
2. Position mounting bracket vertically on wall and use as a
template to pencil markings for drill holes.
3. Select correct mounting hardware: Sheet metal screws and
plastic anchors for concrete block or plasterboard — .187"
(4.75 mm) diameter drill. Sheet metal screws only for metal
panel or wood walls .120" (3.05 mm) diameter drill. Note: If
wall requires anchors, secure them to wall first.
4. Fasten mounting bracket to wall with screws.
5. Mount unit by aligning cutout in back of charging stand with
the top of the bracket. Push charging stand down until seated
securely on bracket.
Wall Mounting Instructions
19
W
all Mounting Instructions
Charging Stand
Bracket
Mounting
Screw
WANM-3999-COL AudioScope3 3/11/97 1:24 PM Page 19