beautypg.com

Welch Allyn Audioscope 3 Portable Screening Audiometer - User Manual User Manual

Page 20

background image

METHOD 2: USING CHARGING TRANSFORMER

1. Turn AudioScope 3 “OFF”.

2. Plug the charging transformer into a power receptacle of appro-

priate voltage, frequency and plug configuration (see p. 22).

3. Plug the output cord of the charging transformer into

AudioScope 3 charging jack.

4. Place the instrument on its side.

AudioScope 3 will not operate while recharging. A fully drained
battery can be recharged overnight. The instrument can be left
charging indefinitely without damage to instrument or battery. For
longest battery life, use the instrument for at least 20 examinations
before recharging, and vary the number of uses between
recharges.

METHOD 3: USING MICROTYMP
PRINTER/CHARGER

The Printer/Charger for the Welch Allyn MicroTymp (Models 71130,
71135, 71170, 71175) may also be used to charge AudioScope 3.
Follow instructions above for charging stand.

NOTE: The bottom portion of AudioScope 3 handle will become
slightly warm during recharging.

18

Method 2

Step 2b

Step 2c

(71040 Charging
Transformer shown)

WANM-3999-COL AudioScope3 3/11/97 1:24 PM Page 18