Vintage Cellars Transtherm Double Ermitage Solid Door Black - Manual (Page 14)

14
GB
IV. Setting the lighting mode (all models)
1
Press the key approximately 5 seconds.
The indicator of the active mode will flash
2
Press the or keys to select the desired mode.
3
Press the key to confirm
There are 3 setting options for lighting:
Permanent lighting (mood lighting for a cabinet fitted with a glass
door, for example).
Lighting which comes on when the door opens (it is switched off
when the cabinet door is closed).
Lighting disabled
Precaution : bright light, never look directly at the LED beam.
6 - c
ommissioning your Wine cABinet
Maintenance operations to be carried out approximately once a year
• Unplug and unload the appliance.
• Regularly vacuum the condenser at the back of the appliance.
• Clean the inside of the compartments with water and a gentle cleaning product.
• Rinse thoroughly.
• Check that the seals are in good condition.
Your Transtherm cabinet is a tried and tested appliance.
Regular monitoring of your
cabinet and reporting any faults
to your retailer will ensur
e
that your appliance provides
you with many years of faithful
service.
7 - e
veryDAy mAintenAnce
Possible incidents Causes Corrective actions
The pictogram is displaying
The temperature
has not returned to
within the ±4°C / 39°F
threshold Check that the door is correctly closed.
Check the condition of the door seal.
If you placed a large amount of bottles in your cabinet in the last few hours,
wait a while then check again. If the alarm is still displaying, contact your
Transtherm retailer.
The pictogram is still displaying
even though I have taken the corrective
actions above
Operating fault Unplug the cabinet and contact your Transtherm retailer.
The pictogram is displaying
Open door alarm Make sure that the door is correctly closed.
The pictogram is flashing
The level of relative
humidity has been <
50 % for over 72 hrs • Pour a glass of water into the duct of the tray (see chapter 7, § IV).
• In order to know how often to add water, count the number of days
separating the 1st day you added water and the day when the pictogram was
displayed
After a few hours, the pictogram will disappear.
The pictogram is displaying
Temperature sensor
fault alarm Contact your Transtherm retailer.
If your appliance does not seem to be working correctly,
contact your Transtherm retailer.
The use of glass doors can alter your wine cabinet’s performance
in some extreme temperature conditions.
8 - o
perAting FAults