Universal Remote Control (URS) RFS200 - Manual (Page 34)

65 66
OTHER INFO
OTHER INFO
Frequently Asked Questions
Warranty/ Specifications Warranty
Universal Remote Control’s Mastercontrol TM RF20 is covered against any manufacturers
defects or workmanship for a period of one year from the date of purchase if purchased
from an authorized Universal Remote Control dealer. Units purchased from online auction
sites or other unauthorized resellers have no warranty. This warranty does not cover the
following items:
- Damage from misuse, neglect, or acts of nature
- Products that have been modified or incorporated into other products
- Products purchased more than 12 months ago
- Units purchased from unauthorized dealers or companies
Specifications
Learning Capability - 825 IR commands at standard frequencies (15kHz to 100kHz)
Macro Capability - 453 Macros of up to 190 steps each
IR Range (Line of Sight via Infrared): 30-50 feet, depending on the environment
RF Range (radio frequency): 50 to 100 feet, depending upon the environment
RF Frequency: 418MHz
Weight: 7.1 oz. (with batteries)
Size: 8.5” x 2.5” x 1”
Batteries: Four AAA Alkaline batteries included
LCD Size: 0.88” x 1.88”
Frequently Asked Questions
What is a “macro” button?
A “macro” is a button on the RF20 that you setup to make a lot of things happen when you
press it. For example, to watch a DVD in most home theaters requires several remote
controls and many button presses (power up the TV, power up the surround sound,
power up the DVD player, set the TV to the correct video input, set the surround sound to
the correct audio input and finally; press play on the DVD player remote control).
Instead of pressing all of those buttons one at a time, the RF20 enables you to setup one
button that does all those steps automatically with one press. For more information on
how and why you should setup macro buttons, watch the Quick Setup DVD Program
Guide or refer to pages 26-29 in this Manual.
If the batteries run out, will I lose my settings?
No. The RF20 stores all of your settings in non-volatile FLASH memory. You could remove
the batteries for months, replace them at your convenience, and the RF20 would still
remember your settings.
Who can I call for more answers?
The Universal Remote Control Technical Support and Customer Service staff are ready to
answer any questions you might have.
Call us at 1-914-835-4484
Monday - Friday, 9AM to 6PM (EST)