Customizing, Hiding and adding pages – Universal Remote Control (URS) RFS200 User Manual
Page 18
33
34
CUSTOMIZING
CUSTOMIZING
Hiding and Adding Pages
Hiding and Adding Pages
Each of your RF20 Components actually contains eight pages. However, only five pages
are visible in the factory default setting. Three page are hidden in each Component.
If you wish to use the hidden pages, you can ADD it. If you don’t want to use some of
the existing pages, you can HIDE them. You can add or hide pages on Components OR
on your favorite channel pages using this simple process:
NOTE: Be sure to program your Macros before you hide pages with potential macros in them. You
can’t access hidden pages during macro setup. However, after you finish Macro setup, you can hide
pages without affecting operation of your macros.
IMPORTANT:You now have 30 seconds to perform
the next step while you are in SETUP mode. If you
don’t press a button within 30 seconds, SETUP will
disappear from the screen, signaling that you have
exited setup mode and you will need to start over.
STEP 1:
Press and hold the MAIN and ENT (Enter)
buttons at the same time for approximately 3
seconds, until the word “SETUP” is
displayed at the top of the LCD screen. This
signals that you are now in setup mode.
STEP 2:
Press the EDIT display button on the LCD
screen.
STEP 3:
Press the PAGE display button once the
screen changes to EDIT mode.
STEP 4:
“PAGE” appears at the top of the screen.
Now, you can navigate to any page, using
the MAIN,
COMPONENT,
FAV, and PAGE
display
buttons.
STEP 5:
When you select a page, the top of the
screen indicates whether you want to
“ADD?” or “HIDE?” the page displayed.
When you want to change a page’s visi-
bility (i.e., either ADD or HIDE), simply
press the LIGHT button.
STEP 6:
You can continue to ADD or HIDE pages
on other Components by repeating Steps
4 and 5.
STEP 7:
When you are finished adding and hiding
pages, press the MAIN button four times
to return to normal operation.
This page is hidden. To ADD
it, press the LIGHT button.
This page is visible.To HIDE
it, press the LIGHT button.
Hiding and Adding Pages
PAGE
BUTTON
FAV
BUTTON
COMPONENT
BUTTONS
MAIN
BUTTON
EDIT
BUTTON
PAGE
BUTTON