Tjernlund SS2 SideShot (Discontinued Version - Pre UC1 Universal Control) 8504063 Rev B 11/99 User Manual

Model ss2 installation instructions, Tjernlund products, inc, Owner instructions, do not destroy

P/N 8504063

OWNER INSTRUCTIONS, DO NOT DESTROY

Recognize this symbol as an indication of important safety information!

NOTE: MAXIMUM FLUE GAS TEMPERATURES MUST NOT EXCEED 650oF
(343

C) MINIMUM TEMPERATURE MUST BE 250

F (121

C) AT VENT SYS-

TEM INLET.

THESE INSTRUCTIONS ARE INTENDED AS AN AID TO QUALIFIED, LICENSED SERVICE PER-
SONNEL FOR PROPER INSTALLATION, ADJUSTMENT AND OPERATION OF THIS UNIT.
READ THESE INSTRUCTIONS THOROUGHLY BEFORE ATTEMPTING INSTALLATION OR
OPERATION. FAILURE TO FOLLOW THESE INSTRUCTIONS MAY RESULT IN IMPROPER
INSTALLATION, ADJUSTMENT, SERVICE OR MAINTENANCE POSSIBLY RESULTING IN FIRE,
ELECTRICAL SHOCK, CARBON MONOXIDE POISONING, EXPLOSION, PERSONAL INJURY
OR PROPERTY DAMAGE.

NOTE: Burner capacities exceeding 1 GPH may require the burner to be adjusted to more

efficient (12.5-13% CO

) than typical levels to maintain recommended over-fire draft

settings. See “Draft Adjustment Procedure” on page 12 of this manual or consult
factory at 1-800-255-4208 with questions prior to installation.

DO NOT DESTROY. PLEASE READ CAREFULLY AND

KEEP IN A SAFE PLACE FOR FUTURE REFERENCE.

MODEL SS2

INSTALLATION INSTRUCTIONS

REV. B 11/99

TJERNLUND PRODUCTS, INC.

1601 Ninth Street • White Bear Lake, MN 55110-6794
PHONE (651) 426-2993 • (800) 255-4208 • FAX (651) 426-9547
Visit our web site • www.tjernlund.com

CAUTION: The owner of the SS2 must keep the area around the vent terminal

free of snow, ice and debris.