Rice Lake RS-130 - Operation Manual - Manual (Page 9)

Operation 5
3.0 Operation
The following section describes the front panel keys, annunciators, and display functions (displayed in Figure
3-1 on page 6) of the
RS-130
. Key functions are described in Table 3-1 below. To turn on the scale, toggle the On/
Off switch located on the bottom of the scale.
Key Function/Description
M1 - M8 Eight direct PLU’s for saving different unit prices or figures. For example: to save 7.50 in
the M8 setting,
1. Key in 750
2. Press and hold the
M8 key until the scale beeps (approximately three seconds)
• Every time you press the M8 key the UNIT PRICE $ display shows 7.50
• To change the setting of one of the memory keys, follow the steps above.
PLU Set up to 89 different indirect PLU’s. (10-99 allowed)
1. Key in the unit price
2. Press the
PLU key once
3. Enter the first digit of the PLU number, when entering the second digit hold the
button until the scale beeps (approximately three seconds)
• PLU is displayed in the
WEIGHT display
• To recall a PLU, press PLU and enter the number you want to recall.
• To change the PLU settings, key in the new unit price and follow steps 2 - 3.
UNIT This key selects the unit of measure (kg, lb or oz) in weighing mode.
1. Press the
UNIT key, WEIGHT display shows ch9-
2. Press: 1 to select kg, 2 to select lb or 3 to select oz (default is lb)
• The annunciator will flash above the selected unit of measure in the
UNIT PRICE $ display.
• Oz not available in Canada
TARE Acquire the net weight value of the object being weighed.
1. Place the package or container on the platter, the weight appears on the
WEIGHT display.
2. Press the TARE key, the WEIGHT display returns to zero. A cursor appears above
NET in the WEIGHT display.
KEYBOARD
TARE*
In Gross mode, place item on scale.
1. Use the keyboard to enter the tare weight.
2. Press the
TARE key.
Example: with a tare of 61, the WEIGHT display will show 0.61 NET
CHANGE Compute the amount of change to be given back to a customer for their purchase. For
example: when
TOTAL $
shows 15.00 and you receive $20.00 from the customer;
Press the CHANGE key and enter 2000 . The
UNIT PRICE $
display shows C 5.00
(change due). The
TOTAL $
display shows 20.00 (cash received).
ZERO Resets gross weight to zero.
CLEAR Press the CLEAR key to erase the figure shown in the
UNIT PRICE $
display.
• Sets the decimal point.
* Feature available on SN B00551 or higher only
Table 3-1. Function Keys