Rice Lake Star SP298 Series Programmers Manual - Manual (Page 29)

26
ESC/POS Mode Commands (TM-295 emulation)
The following table lists the TM-295 mode commands that are supported by this
printer.
*1: n/60-inch line spacing and paper feed commands:
Since the minimum paper feed pitch for this printer is 1/144 inch, n/60 inch can
considered an approximate value. However, the actual value is INT ((6n/5) +
0.5)/72 inch.
Control Codes
Hexadecimal
Codes
Function
09 Horizontal tab
0A Line feed
0C
Paper eject in single sheet mode
Paper mode print and return
10 04 Enables real-time status send (Serial I/F only)
18 Cancels print data in page mode
SP 1B 20 Sets size of space to right of character
! 1B 21 Enables batch print mode
# 1B 23 Sets memory switch
% 1B 25 Enables/disables download character set
& 1B 26 Defines download character
* 1B 2A Selects bit image mode
2 1B 32 Selects 1/6-inch line spacing
3 1B 33 Selects approximate n /60-inch line spacing *1
= 1B 3D Selects peripheral device
@ 1B 40 Initializes the printer
C 1B 43 Sets the eject length for single-sheet printing
D 1B 44 Sets horizontal tab position
F 1B 46 Enables/disables reverse feed for single-sheet mode
J 1B 4A Prints and n /60-inch (approximate value) paper feed *1
K 1B 4B
Prints and n /60-inch (approximate value) reverse paper feed
*1