Rice Lake MSI-9850 CellScale RF Digital Indicator - Ethernet Option Supplement - Manual (Page 9)

MEASUREMENT SYSTEMS INTERNATIONAL
After the scale Ethernet interface settings have been set you can rescan the network to find the device
with the new settings. Then use the “Chat” button to open a dialog that demonstrates simple
communications with the scale.
The transmit buttons are quick links to sending a few of the most common host commands available.
The “@W1” command requests the current weight from the scale. The “@D1” command requests the
current date from the scale. The “@T1” command requests the current time from the scale. The
“@E” command prints the programmed end of line string (defaults to carriage return, line feed). The
“;” semicolon command is a special command the instructs the scale to reset it's command parser. If
using the other host commands do not get responses, use the “;” semicolon command to reset the scale
parser.
Finally, the Scale Discovery Utility provides a quick link to “Open Web Interface” to the scale. The
following section details the web interface.
Page 9 of 20
Illustration 5: Scale Discovery Utility - Chat