Rice Lake Intercomp SW™ Deluxe Portable Vehicle Scale - Manual (Page 5)

SW Users
Rev G, February, 2000
5
Physical
2.5” Weigh Pad Dimensions:
Weight: 15” x 15” x 2.5” per pad
23 lb / 10.5 kg
Carrying Case /
Control Box Dimensions: 17” x 11” x 7”
Weight: 10 lb/ 4.5 kg
Material: ABS structural foam
Optional Equipment
15” x 15” Ramp, Snap In, cast aluminum (100330)
This option allows you to drive the car onto the pads in the case that you are not using
a setup rack or jacking the car up.
220 VAC/ 50 Hz Power Pack (100546)
220 VAC plug-in transformer provides direct power to the SW control box.
Tape Printer
An external tape printer can be connected and powered from the control box. Example
printouts are shown in Appendix A. Also see sections titled Optional External Printer
and Printing.
RS232 serial data output (100158)
If the tape printer is not used, this option provides a RS232 output so the system may
be connected to a computer or printer.
System Carrying Case (100056)
Holds the 4 platform scales, indicator, cables, and manual