Rice Lake Intercomp SW™ Deluxe Portable Vehicle Scale - Manual (Page 4)

SW Users
Rev G, February, 2000
4
Introduction
This manual contains specifications and operating instructions for Intercomp's SW
Scale System.
Specifications
Controls
General: Zero, Kg/Lb, Test, Light, Adjust Screen, Print, Set
Time/Date, On, Off
Numeric: 13-key standard layout
Channel selection: LF, RF, LR, RR, ALL
Weight and Percent 8-key Weight and Percent selection
Storage Registers 2-key register and I.D. selection
Display: 1” 2 x 16 character(0.35”) alphanumeric LCD
readout
Indicators: lb/kg, Lo Bat.
Electrical
Voltage: 12 VAC/VDC, 120/240 VAC
Batteries: 12 x AA-size disposable alkaline cells or rechargeable Nickel-
Cadmium cells
Filtering: Analog: Trans-besel filter
Digital: Average of several internal weights gives steady
readings for unstable loads
Auto-zero: Satisfies all HB-44 requirements
Input/Output: Input: 4 analog channels
Output: RS232 serial
Performance
Speed:
≈
1 sec to typical reading (static)
Accuracy:
±
0.1% of applied load or
±
display graduation, whichever is
greater
Divisions: 6000 lb/ 2800 kg capacity: graduation = 1 lb/0.5 kg
8800 lb/ 4000 kg capacity: graduation = 1 lb/0.5 kg
Environmental
Humidity: 10 to 95% non-condensing
Temperature: Storage: -40
°
C to +75
°
C. / -40
°
F to +170
°
F
Operating -10
°
C to +40
°
C. / +14
°
F to +104
°
F