Rice Lake GoDEX DT4 User Manual - Manual (Page 19)

DT2 / DT4 User Manual
17
4-2. The interface of NetSetting
Click the NetSetting icon to start the program; you will see the start page as below. The start
page will display the basic information of connected printer and your PC.
Click the magnifier icon to search the Godex printers which are connected via Ethernet port in
you network environment. Once a connected Godex printer is detected, it will be listed on the
start page.
There are six tabs on the top of interface which can configure different types of network settings.
But for the data security reason, you need correct password to enter the configuration pages.
【 Note 】
The default password is “1111”, you can change the password later from the “IP Setting” tab.