0 configuring network settings, 1 msi scale discovery utility, Configuring network settings – Rice Lake MSI Crane Scales - Ethernet Option User Manual
Page 7

Configuring Network Settings
3
5.0
Configuring Network Settings
Network settings can be configured from the MSI Scale Discovery Utility, or by opening a web page and pointing it
at the scale device address. The network configuration is specific to every network. Please consult the network
administrator for this information.
5.1 MSI Scale Discovery Utility
Note
Direct.msiscales.com may need to be added to the security on the computer for the Scale Discovery Utility to
run. See Section 9 on page 11..
The Scale Discovery Utility can be accessed from the
under Products/Software Applications. The
prog
address of 224.0.5.128. These will need to be enabled on the firewall for the Scale Discovery Utility to work
(typically enabled by default).
The program is loaded from the web page via Java Web Start technology. This ensures whenever the program is
started, the latest version is being used.
Figure 5-1. MSI Scale Discovery Utility
Select
Scan Network
for the scale. The scan should take five seconds, and when complete will show a list of the
scales found.
Note
When the scale first turns on, the network interface should be allowed one minute to boot up and acquire an
address.
To view information about the Ethernet interface, select
Device Information
.
Figure 5-2. Scale Discovery Utility - Device Information