Rice Lake 920i FlexWeigh Systems - 104 - Manual (Page 14)

10 System 104 Loss-in Weight Dispensing Controls
3.5 Modifying the Dispensing Speeds
Use the following steps to modify the dispensing speeds.
1. From the Main Setup Menu Screen , press the Setup Password softkey.
2. Press the More=> softkey to access the second and third menu screens.
Figure 3-7. Setup Main Menu Screen #2
3. Press the Single Speed Enabled, Dual Speed Enabled or Parallel Speed Enabled softkey.
4. The system will toggle between the three modes of operation.
3.6 Modifying Auto Print
Use the following steps to modify the auto print.
1. From the Main Setup Menu Screen , press the More=> softkey to access the second setup menu screen.
2. Press the Auto Print Enabled or Auto Print Disabled softkey.
Figure 3-8. Auto Print Disabled Softkey
3. The system will toggle between the two modes of operation.
06/02/2011 02:15PM SCALE #1
Auto Print
Disabled
More=>
_ _ _ _ _
SCALE #1
Gross
Lb
<=More
Program: Express 104 PN120599 V 1.00
ID #1 (disabled) Start O Disp Cmpt
ID #2 (disabled) Resume O Slow Cycle
Single-Speed (enabled) Reset O Disp Slow
Auto Print (disabled) Stop O Disp Fast
Delay After Discharge (sec) 3.0
Setup Menu
Single-Spd
Enabled
Delay
After Disch
Auto Print
Disabled