Rice Lake 920i FlexWeigh Systems - 102 - Manual (Page 14)

10 System 102 Automatic Fill, Automatic Discharge Filler
3.5 Modifying the Filling Speeds
Use the following steps to modify the filling speeds.
1. From the Main Setup Menu Screen , press the Setup Password softkey (Figure 3-2).
2. Press the More=> softkey to access the second and third menu screens.
Figure 3-7. Setup Main Menu Screen #2
3. Press the Single Speed Enabled, Dual Speed Enabled or Parallel Speed Enabled softkey. The system will
toggle between the three modes of operation.
3.6 Modifying the Auto Tare
Use the following steps to modify the auto tare.
1. From the Main Setup Menu Screen , press the More=> softkey to access the second setup menu screen.
Figure 3-8. Auto Tare Softkey
2. Press the Auto Tare Enabled or Auto Tare Disabled softkey. The system will toggle between the two modes of
operation.
02:15PM SCALE #1
Auto Tare
Enabled
<= More
Setup Menu:
- - - - - - SCALE #1
Gross
Lb
SETUP MENU
More => Dual Speed
Enabled
Auto Print
Disabled
SETUP MENU
Program: Express 102 PN120597 (V 1.00)
ID #1 (disabled)
Start O Zero Tol
ID #2 (disabled) Resume O Fill Copt
Dual Speed (enabled) Reset O Slow Fill
Auto Tare (enabled) Stop O Fast Fill
Auto Print (disabled) Discharge O Discharge
Delay After Discharge (sec) :30
04/28/2011
02:15PM SCALE #1
Auto Tare
Enabled
<= More
Setup Menu:
- - - - - - SCALE #1
Gross
Lb
SETUP MENU
More => Dual Speed
Enabled
Auto Print
Disabled
SETUP MENU
Program: Express 102 PN120597 (V 1.00)
ID #1 (disabled)
Start O Zero Tol
ID #2 (disabled) Resume O Fill Copt
Dual Speed (enabled) Reset O Slow Fill
Auto Tare (enabled) Stop O Fast Fill
Auto Print (disabled) Discharge O Discharge
Delay After Discharge (sec) :30
04/28/2011