3 modifying the setup password, 4 enabling/disabling additional data fields – Rice Lake 920i FlexWeigh Systems - 102 User Manual
Page 13
Modifying the Setup Password
9
3.3
Modifying the Setup Password
Use the following steps to modify the setup password.
1. From the
Main Setup Menu Screen
, press the
Setup Password
softkey. The system prompts
Enter New
Password
.
Figure 3-5. Enter New Password
2. Enter the new password and press the
enter
key. The system prompts
Re-enter password
to verify.
3. Re-enter the password and press the
enter
key again. The system performs one of the following actions.
• If the passwords match, the system displays
Password Changed.
• If the passwords do not match, the system displays
Passwords Did Not Match
and exits the operation.
3.4
Enabling/Disabling Additional Data Fields
Use the following steps to enable or disable additional data fields.
1. From the
Main Setup Menu Screen
, press the
Setup Password
softkey.
2. Press the
ID #1
or
ID #2
softkey. The system displays
Enable Extra Data #1
or
Extra Data #2
while displaying
Yes
or
No
softkeys.
Figure 3-6. Enabling ID’s
3. The operator does one of the following.
Press the
Yes
softkey, the system prompts
Enter Extra Data #1 Name
. Enter the name and press the
enter
key
on the 920i. A new data field appears on the main display and as a softkey so that the operator can change
it.
Press the
Yes
softkey and this returns the operator back to Step 1.
04/28/2011
02:15PM
SCALE #1
Cancel
End
Enter New Password:
_ _ _ _ _
SCALE #1
Gross
Lb
Home
Program: Express 102 PN120597 (V 1.00)
ID #1 (disabled)
Start
O Zero Tol
ID #2 (disabled)
Resume
O Fill Copt
Dual Speed (enabled)
Reset
O Slow Fill
Auto Tare (enabled)
Stop
O Fast Fill
Auto Print (disabled)
Discharge O Discharge
Delay After Discharge (sec) :30
Setup Menu
=>
04/15/2011
02:15PM
SCALE #1
No
Enable ID #1:
=>
136.8
SCALE #1
Gross
Lb
SETUP MENU
Yes
Program: Express 102 PN120597 (V 1.00)
ID #1 (disabled)
Start
O Zero Tol
ID #2 (disabled)
Resume
O Fill Copt
Dual Speed (enabled)
Reset
O Slow Fill
Auto Tare (enabled)
Stop
O Fast Fill
Auto Print (disabled)
Discharge O Discharge
Delay After Discharge (sec) :30