2 manual tickets, 3 supervisor mode, 4 editing grains – Rice Lake 920i Grain Program User Manual
Page 7
Operation
3
2.2
Manual Tickets
1. Print a manual ticket by pressing the
Manual Ticket
softkey.
2. The indicator will prompt
Enter Gross Weight
. Enter the gross weight, then press the
enter
key.
3. The indicator will prompt
Enter Tare Weight
. Enter the tare weight, then press the
enter
key.
4. The indicator will prompt
Enter Truck ID
. Enter the Truck ID, then press the
enter
key.
5. The indicator will prompt
Enter Grain No.
Enter the grain number, then press the
enter
key.
6. The indicator will prompt
Enter % Shrink
. Enter the shrink percentage, then press the
enter
key.
7. The indicator will prompt
Enter % Dockage
. Enter the dockage percentage, then press the
enter
key.
8. The indicator will prompt
Enter % FM
. Enter the foreign material percentage, then press the
enter
key.
9. The indicator will prompt
Is This a Contract?.
Press
Yes
and follow the prompts for the contract ticket or
No
to get the finished ticket.
10. The printed ticket will be similar to the automatic ticket but weights will have a “K” printed next to them
indicating the values were keyed.
Using a manual ticket does not remove truck ID’s from the truck database.
2.3
Supervisor Mode
The supervisor mode allows the operator to add and delete grains and contracts, print the totals for all the grains or
contracts, clear the totals for individual or all the grains or contracts.
To enter the supervisor mode press the
Supervisor Mode
softkey, the indicator will prompt the user
Enter Password
.
The operator will key in the password, when the correct password is keyed in then the supervisor keys will be
displayed. The default password is
2349171
.
2.4
Editing Grains
1. Press the
Edit Grains
softkey, the grain softkeys will be displayed.
2. To add a grain, press the
Add Grain
softkey.
3. The indicator will prompt
Enter Grain No.
Enter the grain number, then press the
enter
key.
4. The indicator will prompt
Enter Grain Name
. Enter the grain name, then press the
enter
key.
5. The indicator will prompt
Enter Divisor
. Enter the divisor, then press the
enter
key. The grain will then be
stored.
6. To remove a grain, press the
Remove Grain
softkey.
7. The indicator will prompt
Enter Grain ID to Delete
. Enter the grain ID followed by the
enter
key.
8. The grain will then be removed from the database.
9. To clear all the totals from the grain database, press the
Clear All Totals
softkey.
10. The indicator will prompt
Clear Grain Totals
with
Yes
and
No
softkeys.
• Press the
Yes
softkey to confirm deleting all of the totals for the grains.
• Press
No
to return to the grain softkeys without deleting.
11. To print a grain report, press the
Print All Totals
softkey and the grain report will be printed.
An example grain report is shown below:
Figure 2-2. Sample Grain Report
Note
GRAIN REPORT
11:56AM 11/01/2002
****************************************
NO. NAME DIVISOR ACCUMULATION
1 BEANS 60
242.39
2 CORN 75 0.00
........................................
TOTAL ALL GRAINS 242.39