QOMO QD700 - Manual (Page 20)

VIDEO DISPLAY AND CAPTURE
A. Static Images Snap
Select [Start] -> [All Programs] -> [QOMOCap] –> “QOMOCap” to
open the QOMOCap.exe. Click [File] -> [Set Capture File] to locate
the image file into your desired folder. Then click [Set Frame File
Name] to input the name of the file. Click [Capture] -> [Capture
Frame] to save the static image.
B. Snap Video Stream
Click [File] -> [Set Capture File] to select the location of the file to be
saved. Then input the name of the file. Click [Capture] -> [Start
Capture] to start capture, and click [Capture] -> [Stop Capture] to
stop. If you want to set the time limit for the capture, select [Capture]
-> [set time limit] to set the time limit. (If you have set the time limit, it
will stop automatically when the time is up.)
C. Display and Edit the Static Image
You can use the “Imaging” or “Paint” tool to display and edit the static
image. To run a tool, click [Start] -> [All Program] -> [Accessories] ->
“Imaging” or “Paint” to open a picture.
D. Play Video Stream
Click [Start] -> [All Programs] -> [Accessories] -> [Entertainment] –>
“Windows Media Player” or “ActiveMovie control”. You can also click
[File] -> [Display Captured Video Stream] to play video stream in the
QOMOCap program.
E. Set the Frame Rate
Click [Capture] -> [Set Frame Rate], and click open “Choose Frame
Rate” to set the frame rate.
F. Set Time Limit
Click [Capture] -> [Set Time Limit] to set the time limit while capturing
video.
20