QOMO QD700 - Manual (Page 16)

FREEZING IMAGE
Press the “Frz” button to freeze the image. When the output signal is
RGB, in order to show a still image on the screen, press the “Frz”
button. The frozen image can’t be adjusted (Zoom in/out, color
adjustment, etc.).
Note: This function is not available on S-Video and Video
output.
BRIGHTNESS ADJUSTMENT
If the image effect is not satisfactory, you can adjust the brightness to
get a better image effect. Use the “BRIGHT +” or “BRIGHT -” button
to adjust the brightness. To increase the brightness, press the
“BRIGHT +” button. To decrease it, press the “BRIGHT -” button. To
go back to the initial brightness press the “AUTO” button.
WHITE BALANCE ADJUSTMENT
Each time the lighting condition changes, the user should adjust the
white balance of the CCD.
Press the “AUTO” button to adjust the white balance automatically.
AUTO ADJUSTMENT
One of the QD700’s special functions is auto adjustment. Press the
“AUTO” button to auto adjust the white balance and the focus. The
whole process takes about 10 seconds.
TEXT/IMAGE MODE
Press the “TEXT” button to switch between image/text modes. To
display a text file, switch to the text mode to get a clearer text effect.
(On the remote control)
COLOR AND B&W MODE SWITCH
Press “B&W” once to enter the Black & White mode; Press again to
return to the Color mode.
16