Opening and closing, Smartkey – Mercedes-Benz E-Wagon 2015 User Manual
Page 88

The SmartKey now functions as follows:
X
To unlock the driver's door: press the
% button once.
X
To unlock centrally: press the % but-
ton twice.
X
To lock centrally: press the & button.
The KEYLESS-GO function is changed as fol-
lows:
X
To unlock the driver's door: touch the
inner surface of the door handle on the
driver's door.
X
To unlock centrally: touch the inner sur-
face of the door handle on the front-
passenger door or the rear door.
X
To lock centrally: touch the outer sensor
surface on one of the door handles.
X
To restore the factory settings: press
and hold down the % and & buttons
simultaneously for approximately six sec-
onds until the battery check lamp flashes
twice (
Y
page 87).
Mechanical key
General notes
If the vehicle can no longer be locked or
unlocked with the SmartKey, use the
mechanical key.
If you use the mechanical key to unlock and
open the driver's door or the trunk lid/tail-
gate, the anti-theft alarm system will be trig-
gered (
Y
page 81).
There are several ways to turn off the alarm:
X
To turn the alarm off with the SmartKey:
press the % or & button on the
SmartKey.
or
X
Insert the SmartKey into the ignition lock.
or
X
To deactivate the alarm with KEYLESS-
GO: press the Start/Stop button in the igni-
tion lock. The SmartKey must be in the
vehicle.
or
X
Lock or unlock the vehicle using KEYLESS-
GO. The SmartKey must be outside the
vehicle.
If you unlock the vehicle using the mechanical
key, the fuel filler flap will not be unlocked
automatically.
X
To unlock the fuel filler flap: insert the
SmartKey into the ignition lock.
Removing the mechanical key
X
Push release catch : in the direction of
the arrow and at the same time remove
mechanical key ; from the SmartKey.
For further information about:
R
unlocking the driver's door (
Y
page 91)
R
unlocking the trunk (
Y
page 98)
R
unlocking the tailgate (
Y
page 98)
R
locking the vehicle (
Y
page 91)
Inserting the mechanical key
X
Push mechanical key ; completely into
the SmartKey until it engages and release
catch : is back in its basic position.
86
SmartKey
Opening
and
closing