Mercedes-Benz E-Wagon 2015 - Manual (Page 152)

Setting the air distribution
X
Turn the SmartKey to position 2 in the igni-
tion lock (
Y
page 157).
X Dual-zone automatic climate control: press
air distribution adjustment button F up or
down, until the desired symbol appears in
the display (
Y
page 143).
X 3-zone automatic climate control: press air
distribution adjustment button I up or
down, until the desired symbol appears in
the display (
Y
page 145).
Setting the airflow
Dual-zone climate control
X
Turn the SmartKey to position 2 in the igni-
tion lock (
Y
page 157).
X To increase/reduce: press airflow switch
G up or down (
Y
page 143).
3-zone automatic climate control
X
Turn the SmartKey to position 2 in the igni-
tion lock (
Y
page 157).
X
To increase/reduce front-compart-
ment airflow: press airflow switch H up or
down (
Y
page 145).
X
To increase/reduce the rear-compart-
ment airflow: press the K or I
switch.
If the battery is not sufficiently charged,
blower output may be reduced. As soon as
the battery is sufficiently charged, full blower
output will be available.
Switching the ZONE function on/off
X
To activate: press the á button.
The indicator lamp above the á button
lights up.
Dual-zone automatic climate control: the
temperature setting for the driver's side is
not adopted for the front-passenger side.
3-zone automatic climate control: the tem-
perature setting for the driver's side is not
adopted for the front-passenger side and
the rear compartment.
X To deactivate: press the á button.
The indicator lamp above the á button
goes out.
Dual-zone automatic climate control: the
temperature setting for the driver's side is
adopted for the front-passenger side.
3-zone automatic climate control: the tem-
perature setting for the driver's side is
adopted for the front-passenger side and
the rear compartment.
Defrosting the windshield
You can use this function to defrost the wind-
shield or to defrost the inside of the wind-
shield and the side windows.
Switch off the "Windshield defrosting" func-
tion as soon as the windshield is clear again.
X
Turn the SmartKey to position 2 in the igni-
tion lock (
Y
page 157).
X
To activate: press the ¬ button.
The indicator lamp above the ¬ button
lights up.
The climate control system switches to the
following functions:
R high airflow
R high temperature
R air distribution to the windshield and
front side windows
R
air-recirculation mode off
If the battery is not sufficiently charged,
blower output may be reduced. Once the bat-
tery is sufficiently charged again, full blower
output will be available again.
X
To deactivate: press the ¬ button.
The indicator lamp above the ¬ button
goes out. The previously selected settings
are restored. Air-recirculation mode
remains deactivated.
or
150
Operating the climate control systems
Climate
control