Mercedes-Benz E-Wagon 2015 - Manual (Page 408)

X Mount the collapsible spare wheel as
described (
Y
page 384).
The collapsible spare wheel must be moun-
ted before it is inflated.
X Pull connector ? and the hose out of the
housing.
X
Remove the cap from the valve on the col-
lapsible spare wheel.
X Screw union nut : of the hose onto the
valve.
X
Make sure on/off switch A of the tire
inflation compressor is set to 0.
X Insert connector ? into a 12 V socket
(
Y
page 314) in your vehicle.
X
Turn the SmartKey to position 1 in the igni-
tion lock (
Y
page 157).
X
Press on/off switch A on the tire inflation
compressor to I.
The tire inflation compressor is switched
on. The tire is inflated. The tire pressure is
shown on pressure gauge =.
X Inflate the tire to the specified tire pres-
sure.
The specified tire pressure is printed on the
yellow label of the emergency spare wheel.
X When the specified tire pressure has been
reached, press on/off switch A on the
electric air pump to 0.
The tire inflation compressor is switched
off.
X
Turn the SmartKey to position 0 in the igni-
tion lock.
X If the tire pressure is higher than the speci-
fied pressure, press pressure release valve
button ; until the correct tire pressure has
been reached.
X
Unscrew air hose union nut : from the
valve.
X Screw the cap onto the valve of the col-
lapsible spare wheel again.
X
Stow connector ? and the hose in the
lower section of the tire inflation compres-
sor.
X
Stow the tire inflation compressor in the
vehicle.
406
Emergency spare wheel
Wheels
and
tires