beautypg.com

Lights and windshield wipers, Replacing bulbs – Mercedes-Benz E-Wagon 2015 User Manual

Page 137

background image

Only operate bulbs in enclosed lamps

designed for that purpose. Only install spare

bulbs of the same type and the specified volt-

age.
Marks on the glass tube reduce the service

life of the bulbs. Do not touch the glass tube

with your bare hands. If necessary, clean the

glass tube when cold with alcohol or spirit and

rub it off with a lint-free cloth.
Protect bulbs from moisture during opera-

tion. Do not allow bulbs to come into contact

with liquids.
Replace only the bulbs listed (

Y

page 135).

Have the bulbs that you cannot replace your-

self changed at a qualified specialist work-

shop.
If you require assistance changing bulbs, con-

sult a qualified specialist workshop.
If the new bulb still does not light up, consult

a qualified specialist workshop.
Bulbs and lamps are an important aspect of

vehicle safety. You must therefore make sure

that these function correctly at all times.

Have the headlamp setting checked regularly.
Vehicles with static LED headlamps
The front and rear light clusters of your vehi-

cle are equipped with LED light bulbs. Do not

replace the bulbs yourself. Contact a qualified

specialist workshop which has the necessary

specialist knowledge and tools to carry out

the work required.
Lamps are an important aspect of vehicle

safety. You must therefore make sure that

these function correctly at all times. Have the

headlamp setting checked regularly.

Overview: changing bulbs/bulb types

You can change the following bulbs. The bulb

type can be found in the legend.

Static LED headlamps
:

High-beam headlamp: H7 55 W

;

Turn signal lamp: PSY 24 W

Changing the front bulbs

High-beam headlamps (static LED head-

lamps)

X

Switch off the lights.

X

Open the hood.

X

Turn housing cover : counter-clockwise

and pull it out.

X

Using the handle extension, turn bulb

holder ; counter-clockwise and pull it out.

X

Take the bulb out of bulb holder ;.

X

Insert the new bulb into bulb holder ;.

X

Insert bulb holder ; into the lamp and turn

it clockwise.

X

Align housing cover : and turn it clock-

wise until it engages.

Replacing bulbs

135

Lights

and

windshield

wipers

Z

This manual is related to the following products: