Mercedes-Benz E-Wagon 2015 - Manual (Page 117)

Adjusting the 4-way lumbar support
: To raise the backrest contour
; To soften the backrest contour
= To lower the backrest contour
? To harden the backrest contour
You can adjust the contour of the front seat
backrests individually to provide optimum
support for your back.
Folding bench seat in the cargo com-
partment (Wagon)
Important safety notes
G WARNING
If the backrests of the rear bench seat are not
locked in the upright position, the backrest
may fold down while driving. In this case, the
seatbelt may not perform its intended protec-
tive function. There is an increased risk of
injury.
Make sure that the backrests of the rear
bench seat are locked in the upright position.
The folding bench seat in the cargo compart-
ment is only suitable for persons no more
than 4.6 ft (1.40 m) tall and weighing a max-
imum of 110 lb (50 kg).
Observe the loading guidelines (
Y
page 292).
The maximum permissible weight available
for passengers may be reduced by extensive
optional extras and the vehicle load. Observe
the maximum gross vehicle weight and the
gross axle weight rating, which can be found
on the vehicle identification plate
(
Y
page 410).
The combined cargo cover and net must be
installed if you are using the folding bench
seat (
Y
page 301).
Folding out the folding bench seat
X Make sure that the backrests of the rear
bench seat are locked in the upright posi-
tion.
X
Move the handle for the combined cargo
cover and net upwards (
Y
page 301).
X Pull release handle : and fold the back-
rest of the folding bench seat upwards.
X
Hook the seat belts into retainers =.
X
Pull release handle ; and fold the folding
bench seat cushion into the sitting posi-
tion.
X
Push down the seat cushion until the back-
rest engages fully.
X
Fold the head restraints upwards.
Seats
115
Seat
s,
steer
ing
wheel
and
mir
ror
s
Z