Mercedes-Benz E-Wagon 2015 - Manual (Page 389)

X To remove: turn the center cover of hub
cap : counter-clockwise and remove.
X
To install: before installing, ensure that
hub cap : is in the open position. To do so,
turn the center cover counter-clockwise.
X
Put hub cap : in position and turn the
center cover clockwise until you feel and
hear hub cap : engage.
X Make sure that hub cap : is installed
securely.
X
Using lug wrench ;, loosen the bolts on
the wheel you wish to change by about one
full turn. Do not unscrew the bolts com-
pletely.
Jacking points (example: Sedan)
The jacking points are located just behind the
front wheel housings and just in front of the
rear wheel housings (arrows).
AMG vehicles and vehicles with AMG
equipment: to protect the vehicle body, the
vehicle has covers next to the jacking points
on the outer sills.
Cover, front (example: vehicles with AMG Sports
package)
X
AMG vehicles and vehicles with AMG
equipment: fold cover = upwards.
X Position jack A at jacking point ?.
Example
X Make sure the foot of the jack is directly
beneath the jacking point.
X
Turn crank B clockwise until jack A sits
completely on jacking point ? and the
base of the jack lies evenly on the ground.
X Turn crank B until the tire is raised a max-
imum of 1.2 in (3 cm) from the ground.
Changing a wheel
387
Whe
el
s
and
tire
s
Z