beautypg.com

Lights and windshi eld wipers, Exterior lighting – Mercedes-Benz E-Wagon 2015 User Manual

Page 132

background image

Rear fog lamp
The rear fog lamp improves visibility of your

vehicle for the traffic behind in the event of

thick fog. Please take note of the country-

specific regulations for the use of rear fog

lamps.

X

To switch on the rear fog lamps: turn the

SmartKey in the ignition lock to position 2

or start the engine.

X

Turn the light switch to L or Ã.

X

Press the R button.

The yellow R indicator lamp in the

instrument cluster lights up.

X

To switch off the rear fog lamp: press the

R button.

The yellow R indicator lamp in the

instrument cluster goes out.

Parking lamps

!

If the battery has been excessively dis-

charged, the parking lamps or standing

lamps are automatically switched off to

enable the next engine start. Always park

your vehicle safely and sufficiently lit

according to legal standards. Avoid the

continuous use of the T parking lamps

for several hours. If possible, switch on the

X right or the W left standing lamp.

X

To switch on: turn the light switch to T.

The green T indicator lamp in the instru-

ment cluster lights up.

Standing lamps
Switching on the standing lamps ensures the

corresponding side of the vehicle is illumina-

ted.

X

To switch on the standing lamps: the

SmartKey is not in the ignition lock or it is in

position 0.

X

Turn the light switch to W (left-hand side

of the vehicle) or X (right-hand side of

the vehicle).

Combination switch

Turn signal

:

High-beam headlamps

;

Turn signal, right

=

High-beam flasher

?

Turn signal, left

X

To indicate briefly: press the combination

switch briefly to the pressure point in the

direction of arrow ; or ?.

The corresponding turn signal flashes three

times.

X

To indicate: press the combination switch

beyond the pressure point in the direction

of arrow ; or ?.

High-beam headlamps

X

To switch on the high-beam headlamps:

turn the SmartKey in the ignition lock to

position 2 or start the engine.

X

Turn the light switch to L or Ã.

X

Press the combination switch beyond the

pressure point in the direction of arrow :.

In the à position, the high-beam head-

lamps are only switched on when it is dark

and the engine is running.
The blue K indicator lamp in the instru-

ment cluster lights up when the high-beam

headlamps are switched on.

X

To switch off the high-beam head-

lamps: move the combination switch back

to its normal position.

The blue K indicator lamp in the instru-

ment cluster goes out.

130

Exterior lighting

Lights

and

windshi

eld

wipers

This manual is related to the following products: