Casio XJ-450 - Manual (Page 82)

82
Using the Setup Menu
■Image Adjustment J Restore Menu Defaults
This sub-menu returns all of the sub-menu items on the Image Adjustment main menu to
their initial default settings.
z You can perform initialization even when there is no input signal. In this case, the
initialization is performed for the currently selected input source.
z “Image Adjustment” main menu “Vertical Position”, “Horizontal Position”, “Frequency”, and
“Phase” settings are initialized for the current signal type (XGA/60Hz, UXGA/60Hz, etc.)
only.
z For details about the initialization procedure, see “To initialize the settings of a particular
main menu item” on page 74.
Volume Adjustment
■Volume Adjustment J Volume
This sub-menu can be used to adjust the volume level of the projector’s speaker. This setting
is also linked to volume settings made with the remote controller’s [VOL +] and [VOL –] keys.
z Changing this setting when there is no input signal changes the volume setting of the
currently selected signal source.
z A different setting is stored for each input source.
■Volume Adjustment J Restore Menu Defaults
This sub-menu returns Volume to its initial default setting.
z You can perform initialization even when there is no input signal. In this case, the
initialization is performed for the currently selected input source.
z Initialization is performed separately for each input source.
z For details about the initialization procedure, see “To initialize the settings of a particular
main menu item” on page 74.