Casio XJ-450 - Manual (Page 72)

72
Using the Setup Menu
2.
Perform steps 2 through 4 under “Basic Setup Menu Operations” on
page 68. On the “Input Settings” main menu, select the “Video Signal”
sub-menu item.
3.
Press the [ENTER] key.
z This displays the video signal selection screen shown below.
4.
Use the [
S] and [T] keys to highlight the item you want to select, and
then press the [ENTER] key.
5.
After you are finished configuring the settings, press the [ESC] key to
close the setting screen and return to the sub-menu screen.
z After you are finished, press the [MENU] key to exit the setup menu.
z Note that the available settings and configuration procedures depend on the setting
screen. See “Setup Menu Reference” on page 77 for details about each sub-menu item.