Casio XJ-450 - Manual (Page 59)

Projection Operations
59
While RGB is selected as the input source, you can display a sub-window that simultaneously
displays the image being input through the VIDEO or S-VIDEO terminal. This function is
called “picture-in-picture” or “P-IN-P”.
z The initial default setting for the sub-window input source is VIDEO. Use the setup menu
when you want to change the sub-window input source to S-VIDEO. For details, see
“Input Settings
J P-in-P Input” on page 90.
z Note that P-IN-P can be used only when RGB is selected as the input source. It is not
available while any other input source is selected.
z If Component is selected for “Input Settings J RGB Input” on the setup menu, you need
to change the setting to RGB in order to use picture-in-picture. Note that the initial
default setting for “Input Settings
J RGB Input” is RGB.
Using Picture-in-Picture (P-IN-P)
RGB input
image
VIDEO
(or S-VIDEO)
input image