Kontron PB-TIM2 - Manual (Page 8)

Chapter 1 Introduction PB-TIM2 User’s Manual
1.3 Specifications
Timer 16-bit up/down synchronous counter
16-bit preset register
16-bit comparator
16-bit zero detection
16-bit last value latch
8-bit prescaler
1-bit toggle register
Input Channels Trigger, gate and clear together with a common
clear. All optoisolated and protected against reverse
polarity
Output Channels 1 digital output per counter, 24V DC @ 200mA with
inductive load protection, high-side switch
Input Voltage 5V, 12V(15V) or 24V
Input Current 15mA typically
Switching Level 2V, 7.4V or 18.6V respectively
Input Frequency Up to 300 kHz, embedded filter
Output Frequency Up to 10 kHz
Isolation Voltages 1500V DC I/O to system, 100V DC between inputs
Timer Clock 4 MHz (250 ns) derived from 16 MHz System Clk.
DTACK-Generation On-board generation
Environment
Operating Temperature 0ºC to 70ºC
Extended Temperature -40ºC to +85ºC
Storage Temperature -55ºC to +85ºC
Humidity 0 to 95% non-condensing
Piggyback Size Width : 48 mm
Length : 102 mm
Depth : 10 mm
Modpack Interface 16-Bit data bus
Page 1-2 © 1996 PEP Modular Computers July 30, 1997