Kontron MARS Smart Battery Kit - Manual (Page 25)

MARS User´s Guide
12. Output of the SBS MARS
There are 2 possible connectors to grip the output voltages and a feature connector to connect the
SBS MARS to a COM backplane.
12.1 ATX Connector (24 pin) X6
The ATX connector X6 has the pining as described in the ATX specification version 2.2.
Fig. 5: ATX Connector at the output side
The cables that are delivered together with our SBS MARS can be used to connect the SBS MARS to
the ATX plug of any computer, especially to the COM baseboards of Kontron.
There is a 20 pin ATX connector cable as well as a 24 pin cable, which could both be used on the 24
pin output connector of the SBS MARS.
The power good (PG) line of this output ATX-connector is asserted high (5V) when +12VDC and
Note:
+5VDC are available at the output. In other cases the PG-signal is low.
Output of the SBS MARS
24