Kontron KTT30-mITX - Manual (Page 9)

KTD-N0857-A Page 6 Specifications
KTT30/mITX Users Guide
3 Specifications
3.1 Functional Specifications
System on Chip (SoC): NVIDIA ® Tegra ® 3

Quad Cortex-A9 multi-processing ARM ® cores up to 1.3 GHz core frequency

ARMv7 instruction set

32 kB data and 32 kB instruction L1 cache per core

Shared 1 MB L2 cache

DDR3 memory interface up to DDR3L-1600 with maximum size of 2 GB

SPI TM flash controller

Three USB ports (EHCI) with one client interface

Audio-Video Processor (AVP, GeForce ® GPU) with a dual display controller

Two integrated audio controllers (PCM and Inter-IC Sound, called IIS or I 2 S)

One Secure Digital / MultiMedia Card (SD/MMC) controller with four instances

Three PCI Express ® ports (only single lane configuration)

One S-ATA ® 2.0 port

Some pins are useable as GPIOs (max. 18 x 3.3V) or as special function pins (e.g. keyboard)

Five UARTs with 16450/550 compatible mode (only two UARTs available)
Onchip SPI TM Flash Controller

Supports FIFO and DMA mode access

Maximum transfer rate of 35 Mbps
Onchip Universal Serial Bus (USB)

All ports are capable to handle USB 2.0 (EHCI)

One port alternatively supports USB client functionality

Supports USB 1.1 low and full speed devices without a companion USB 1.1 host controller
Onchip Graphics Processing Unit (GPU)

Ultra low power GPU up to 520 MHz internal clock and 12 cores

Two independent display controllers support 2D/3D graphics rendering

1080p Video Encode Processor to deliver full HD video streams

OpenGL ® ES 2.0 support

HDMI ® V1.4a interface (max. 1920x1080 pixels)

Low Voltage Differential Signaling (LVDS) flatpanel interface supports 18/24 bit color depth
with a maximal resolution of 1920x1200 pixels

Full hardware acceleration of video decode standards (extract): H.264, MPEG4 and VC1