Kontron KTT30-mITX - Manual (Page 19)

KTD-N0857-A Page 16 Rear Connectors
KTT30/mITX Users Guide
7.3 HDMI® Connector
Graphics Processing Unit
The graphics accelerator supports a HDMI ® interface with Full HD resolution, a variety of LVDS LCD panels
with double clock, color depths of 18/24 bit and resolutions up to 1920 x 1200 pixels.
The HDMI
® interface is available through the standard 19 pin Type A HDMI ® connector J18.
Header Pin Signal Description Type
1 TMDS2+ TMDS data 2 (positive) DSO-3.3
2 GND Ground PWR
3 TMDS2- TMDS data 2 (negative) DSO-3.3
4 TMDS1+ TMDS data 1 (positive) DSO-3.3
5 GND Ground PWR
6 TMDS1- TMDS data 1 (negative) DSO-3.3
7 TMDS0+ TMDS data 0 (positive) DSO-3.3
8 GND Ground PWR
9 TMDS0- TMDS data 0 (negative) DSO-3.3
10 TMDS_CLK+ TMDS clock (positive) DSO-3.3
11 GND Ground PWR
12 TMDS_CLK- TMDS clock (negative) DSO-3.3
13 CEC Consumer Electronics Control IO-5.0
14 N.C. Not connected NC
15 DDC_CLK DDC clock IO-5.0
16 DDC_DATA DDC data IO-5.0
17 GND Ground PWR
18 VCC5 1) Power +5V PWR
19 TMDS_HPD Hotplug detect I-5.0
1
2
Note: 1) To protect the external power lines of peripheral devices make sure that
- the wires have the right diameter to withstand the maximum available current.
- to enclosure of the peripheral device fulfills the fire-protecting conditions of IEC/EN 60950.