Kontron KTT30-mITX - Manual (Page 26)

KTD-N0857-A Page 23 Pin Connectors
KTT30/mITX Users Guide
8.8 Front Panel Header (FRONTPNL)
The power button and other power signals are available through the pin header J7 (16 pins).
Header Pin Signal Description Type Ioh/Iol
1 GND Ground PWR
2 GND Ground PWR
3 BKLTADJ_DWN Backlight brightness down I-1.8
4 BKLTADJ_UP Backlight brightness up I-1.8
5 VCC5 1) Power supply +5V PWR
6 VCC5 1) Power supply +5V PWR
7 SATA_LED+ S-ATA ® LED O-3.3
8 DEEP_SLEEP Indicates deep sleep mode O-5.0
9 GND Ground PWR
10 PWR_BTN+ 2) Power button (positive) I-5.0
11 RESET_IN Board reset input I
12 PWR_BTN- Power button (negative) = GND PWR
13 VCC3 1) Power supply +3.3V PWR
14 GND Ground PWR
15 GND Ground PWR
16 GND Ground PWR
Notes: 1) To protect the external power lines of peripheral devices make sure that
- the wires have the right diameter to withstand the maximum available current.
- to enclosure of the peripheral device fulfills the fire-protecting conditions of IEC/EN 60950.
2) The label PWR_BTN (power button) is identical with NVIDIAs
®
'ONKEY' button.
1