Kontron KTT30-mITX - Manual (Page 11)

KTD-N0857-A Page 8 Specifications
KTT30/mITX Users Guide
Motion Processing Unit (I 2 C TM connection): InvenSense ® MPU-3050 TM

Embedded tri-axis gyroscope

Digital Motion Processor TM (DMP) accelerator engine with a second I 2 C TM port for third party
accelerometers
Digital Accelerometer (I 2 C TM connection): Kionix ® KXTF9-4100

Tri-axis ±2g, ±4g or ±8g accelerometer
Additional Features

Serial Atmel ® touch screen interface (I 2 C TM )

Up to 18 GPIOs on a Feature connector

USB modem card interface with SIM card socket

One SPI TM interface (3.3V) on a pin header

An optional 4-wire processor fan
Operating System Support

Linux ® (kernel version 3.1)

Android ® (kernel version 4.0)

Windows ® Embedded Compact 7
Battery

Exchangeable 3.0V Lithium battery for the Real-Time-Clock (RTC)

Manufacturer Panasonic ® (part number CR2032L/BN, CR2032N/BN or CR2032L/BE)
CAUTION!
Danger of explosion if the battery is incorrectly replaced. Replace only with
the same or equivalent type recommended by the manufacturer. Dispose of
used batteries according to the manufacturer’s instructions.