3 mechanical specifications, Dimensions, 4 electrical specifications – Kontron KTT30-mITX User Manual
Page 13: Supply voltage, Supply current (linux®), 5 environmental specifications, Temperature, Mechanical specifications, Electrical specifications, Environmental specifications
KTD-N0857-A
Page 10
Specifications
KTT30/mITX Users Guide
3.3
Mechanical Specifications
Dimensions
miniITX
TM
form factor 170.2 x 170.2 mm ±0.2 mm (with all connectors 174 x 170.2 mm)
Height approx. 17.5 mm
3.4
Electrical Specifications
Supply Voltage
+5V ±10% DC
Supply Current (Linux
®
)
The power consumption test uses a tool to stress the CPU (100% load) and at the same time another tool to
generate a high graphic throughput. The boards were tested with a HDMI
®
/DVI
®
monitor, USB keyboard &
mouse and the onboard SanDisk
®
16 GByte embedded flash drive as boot device.
Full Load
Idle
Deep Sleep
[A]
[W]
[A]
[W]
[A]
[W]
tbd.
tbd.
tbd.
tbd.
tbd.
tbd.
3.5
Environmental Specifications
Temperature
Operating:
Ambient temperature:
0 to +60°C
1)
Non operating (storage):
Ambient temperature:
-20 to +70°C
2)
Note:
1)
It is the customer's responsibility to provide sufficient airflow around each of the components to keep them within the
allowed temperature range.
2)
Lower limit of storage temperature is defined by specification restriction of the onboard Lithium battery. A board with
battery has been verified for storage temperature down to -40°C by KONTRON.