Kontron KTA55-pITX - Manual (Page 42)

KTD-S0031-E Page 38 Setup Guide
KTA55/pITX User's Guide
18.5.2 Onboard Device Configuration Submenu
Feature Option Description
8Northbridge Configuration Submenu Set northbridge options (e.g. memory)
8Serial-ATA Configuration Submenu Configure the S-ATA devices
8SDIO Configuration
Submenu Configure the SDIO ports
8Audio Configuration
Submenu Configure the audio options
8LAN Configuration Submenu Configure the PCI Express ® LAN controller
8USB Configuration Submenu Configure the USB support
18.5.2.1 Northbridge Configuration Submenu
Feature Option Description
Memory Type N / A Display the memory type
Total Memory N / A Display amount of system memory detected during boot-up
Memory Clock Auto
DDR800
DDR1066
This option allows to select a different memory clock
Memory Clear Disabled
Enabled
Memory clear functionality
I/O Memory Mapping Unit Disabled, 32 MB
64 MB, 128 MB
256 MB, 512 MB
1 GB, 2 GB
The I/O Memory Mapping Unit (IOMMU) is supported on
LINUX based systems to convert 32 bit I/O to 64 bit MMIO
18.5.2.2 Serial-ATA Configuration Submenu
Feature Option Description
Port 0 / Port 1 Model N / A Display the drive model on port 0 and/or port 1
Port 0 / Port 1 Type N / A Display the drive type on port 0 and/or port 1
Port 0 / Port 1 Size N / A Display the drive size on port 0 and/or port 1
Serial-ATA Controller Disabled
Enabled
Enable or disable the S-ATA controller
Serial-ATA Mode AHCI
Native IDE
Legacy IDE
RAID
IDE->AHCI
Configure the S-ATA mode
RAID Mode RAID 5
RAID 0/1
Define the RAID mode