Kontron KTA55-pITX - Manual (Page 12)

KTD-S0031-E Page 8 Specifications
KTA55/pITX User's Guide
3.3 Mechanical Specifications
Dimensions
³
Pico-ITX TM form factor 100 x 72 mm ±0.2 mm (complete with all connectors 100 x 80 mm)
³
Height approx. 46 mm (including heat-sink with fan)
3.4 Electrical Specifications
Supply Voltage
³
+5V DC ±5%
Supply Voltage Ripple
³
Maximum 100mV peak to peak 0 – 20 MHz
Supply Current (DOS prompt)
Power consumption tests were executed during the DOS prompt with 4 GB DDR3 SDRAM, DVI monitor, USB
keyboard and S-ATA SSD (Solid State Drive, external powered) as boot device (default BIOS settings).
Full Load Soft Off S5
[A] [W] [A] [W]
2.85 14.25 0.075 0.375
Supply Current (Windows ® 7, 64 bit)
The power consumption tests were executed during Windows ® 7 by using a tool to stress the CPU (100%
load) and extensive 3D graphic. The boards were ran with 4 GB DDR3 SDRAM, DVI monitor, USB keyboard &
mouse and S-ATA (Solid State Drive, external powered) as boot device (default BIOS settings).
Full Load Idle Standby S3
[A] [W] [A] [W] [A] [W]
3.15 15.75 1.45 7.25 0.11 0.55