Kontron KTGM45-mITX - Manual (Page 89)

KTGM45 Users Guide
KTD-N0793-O Page 89
Feature Options Description
Force boot Device Disabled
Primary IDE Master
Primary IDE Slave
Secondary IDE Master
Secondary IDE Slave
Third IDE Master
Third IDE Slave
5 th IDE Master
6 th IDE Master
RAID
Any Harddrive (Above)
Network
Overrides current boot setting. Device must be in the
boot priority menu, though. If the device fails to boot,
the system will NOT try other devices.
Boot Fail Option Wait Key Press
Retry Again
Reboot System
Wait Key Press: Wait for manually activation of key
before retrying booting sequence.
Retry Again: Automatically and continuously retrying
booting sequence.
Reboot System: Automatically reboot system.
Alternative initialization Disabled
Enabled
Use of this can help some bad devices to work
prober.
Adaptec Raid Card Init Disabled
Enabled
This will insure that Adaptec Raid Card 6805 is
always found. Only select this if 6805 Raid Card is
installed.
Notes:
List of errors:
BEV (Bootstrap Entry Vector) list of devices (except External LAN) with bootable ROM. Included is on-board
LAN.
Pressed Primary Master Hard Disk Error PCI I/O conflict
Timer Error S.M.A.R.T HDD Error PCI ROM conflict
Interrupt Controller-1 error Cache Memory Error PCI IRQ conflict
Keyboard/Interface Error DMA Controller Error PCI IRQ routing table error
Halt on Invalid Time/Date Resource Conflict
NVRAM Bad Static Resource Conflict
BIOS setup