Kontron KTGM45-mITX - Manual (Page 31)

KTGM45 Users Guide
KTD-N0793-O Page 31
3.4.3 TV-Out
The KTGM45 boards include layout for TV-Out connector, but TV-out connector is not mounted from the
board PN revision xxxxxx03. Anyway the TV-out has support for (Analogue) Component Video (S-Video,
YPbPr or RGB) and Composite Video Output (NTSC/ PAL output format).
Note Pull
U/D Ioh/Iol Type
Signal PIN Signal Type Ioh/Iol Pull
U/D Note
GND PWR - -
/75Ω - AO TVDACC 4 7 3 TVDACB AO - /75Ω
- - PWR GND 2 6 5 1 GND PWR - -
- - - NC TVDACA AO - /75Ω
Pin Signal Description
3 TVDACB TVDAC Channel B output supports:
Component Video - S-Video: Luminance analogue signal
Component Video - YPbPr: Luminance (Y) analogue signal
Component Video - RGB: Green analogue signal
(Composite Video: Not used)
4 TVDACC TVDAC Channel C output supports:
Component Video - S-Video: Chrominance analogue signal
Component Video - YPbPr: Chrominance (Pr) analogue signal
Component Video - RGB: Red analogue signal
(Composite Video: Not used)
5 TVDACA TVDAC Channel A output supports:
(Component Video - S-Video: Not used)
Component Video - YPbPr: Chrominance (Pb) analogue signal
Component Video - RGB: Blue analogue signal
Composite Video: CVBS signal
Connector Definitions
Connector Definitions