Kontron CP-RIO3-05 - Manual (Page 17)

CP-RIO3-05 Introduction
ID 1044-0711, Rev. 1.0 Page 1 - 3
P R E L I M I N A R Y
1. Introduction
1.1 Board Overview
The CP-RIO3-05 3U CompactPCI rear transition module has been designed for use with the
CP3002-RC and the CP3002-RA 3U CompactPCI CPU boards from Kontron and provides
comprehensive rear I/O functionality for peripherals. In order to use the CP-RIO3-05, a 3U
CompactPCI backplane with rear I/O support as well as a compatible and correctly configured
CPU board are required. For further information concerning possible compatibility with other
3U Kontron CompactPCI boards, please contact Kontron.
The CP-RIO3-05 comes with four Gigabit Ethernet ports, two USB 2.0 ports, one VGA (CRT)
port, and two serial ports (COM1 and COM2) on the front panel, as well as two onboard SATA
ports for connection to external SATA devices, one onboard GPIO port, two onboard serial
ports (COM1 and COM2), and one CompactPCI connector for connecting the CP-RIO3-05 to
the backplane. For resetting the CP3002-RC/CP3002-RA, the CP-RIO3-05 provides an on-
board reset button.
1.2 Board Diagrams
The following diagrams provide additional information concerning the boards’ functionality and
component layout.
1.2.1 Functional Block Diagram
Figure 1-1: CP-RIO3-05 Functional Block Diagram
Serial Port
Connector
Onboard
Connector Front Panel
Connector
CPCI
Connector
rJ2
SATA II
Components
RS-232
COM1
(D-Sub)
4x Mag 4x Gigabit Ethernet
GPIO
VGA
VGA
(D-Sub)
2x Dual
GbE
(RJ-45)
5x Input
3x Output
SATA
Connector
SATA II
Repeater
SATA
Connector
SATA II
SATA II SATA II
4x Gigabit Ethernet
RS-232 / RS-422
COM2
(D-Sub)
2x USB 2.0
Dual
USB 2.0
(type A)
RS-232
Serial Port
Connector
RS-232 / RS-422