Kontron CP3003-V uEFI BIOS - Manual (Page 62)

The uEFI Shell CP3003-SA/CP3003-V uEFI BIOS
Page 56 ID 1053-4014, Rev. 2.0
D R A F T — F O R I N T E R N A L U S E O N L Y
6.2.9 kpassword uEFI Shell Command
kpassword
FUNCTION: Control uEFI setup and shell passwords
SYNTAX: kpassword [-u [-n ] [-o ]]
[-s [-n ] [-o ]]
where:
-u Install or change user password
-s Install or change superuser password
Additional options for automated scripting
-n New password to be set
-o Password to be overwritten if one is already set
When used without option “-n” the password is
cleared
DESCRIPTION: The kpassword command is used to determine the status of both
passwords (set or not set) and to set or clear the uEFI shell and setup
passwords. Both user and superuser (Administrator) passwords can be
controlled with this command.
Call without options to get current password status
If a password has been previously entered, it must be re-entered to
validate the command (-o ).
Entering an empty password clears the password.
USAGE: Set User password for uEFI setup and shell
COMMAND / RESPONSE EXAMPLE:
kpassword -u
No password is installed!
Enter new USER password
-->
Retype password
-->
Done.