Gastroback 42504 Design Grill-Barbecue Advanced - Manual (Page 7)

Base Plate Tilt Dial
Using the tilt dial (left hand dial), you can select the slope of the base plate according to your
requirements: optimum fat drainage on an inclined surface or a level cooking plate, so that
the foods do not run or slide off the grill. Simply set the required position (ANGLE or FLAT) on
the tilt dial.
WARNING: Always adjust the tilt dial (ANGLE or FLAT) before placing any food on the coo-
king plates. Do not turn the tilt dial in the ANGLE position with food on the cooking plate, to
avoid spilling of hot fat and meat juices causing scalds and damage.
• ANGLE: the base plate is in the inclined position. This position is suitable for achieving the
maximum fat drainage when using the appliance as a closed grill.
• FLAT: the base plate is in the level position. This position is ideal for cooking sausages, pan-
cakes, eggs, and other foods when a flat plate is required so that the foods do not run or slide
off the grill.
IMPORTANT: Always select the FLAT position, when using the appliance as an open grill.
Variable Temperature Control Dial
The Grill Barbecue features a Variable Temperature Control dial (right hand dial), which
allows a variety of foods to be cooked. Just select a temperature suited to the foods which are
being cooked.
• With the dial set on SEAR, the temperature is correctly
suited to grilling meats or other foods.
• With the dial set on SANDWICH, the temperature is
correctly suited to toasting sandwiches.
Timer Dial
The Grill Barbecue features a 15 minute timer, which allows you to monitor the time elapsed
during preheating or cooking. The timer will ring once when the set time has elapsed.
IMPORTANT: The grill will not switch off, it will remain heating.
1. To set the timer, simply turn the dial clockwise completely (‘15’ position) and then anticlok-
kwise to select the desired minutes.
8
42504_Manuel_E.qxd 10.02.2005 9:01 Uhr Seite 8