Gastroback 40965 Design Food Processor Advanced - Manual (Page 17)

Always clean the appliance and accessories before storing (see ‘Care and Cleaning’).
Ensure to store the appliance and accessories (such as the second processing bowl, mini
processing bowl including the lid and the ejector disc), where it is clean, dry and safe
from frost, direct sunlight and inadmissible strain (mechanical or electric shock, heat,
moisture) and where it is out of reach of young children. Place the appliance on a clean
and stable surface, where it can not fall. Do not place any hard or heavy objects on the
appliance.
The power cord can be stored by pushing it into the back of the motor
base (picture G).
Notes for disposal
Dispose of the appliance must be effected in accordance with the correspon-
ding local regulations and requirements for electrical appliances. Please contact your local
disposal company.
Warranty
We guarantee that all our products are free of defects at the time of purchase. Any
demonstrable manufacturing or material defects will be to the exclusion of any further
claim and within 2 years after purchasing the appliance free of charge repaired or substituted.
There is no Warranty claim of the purchaser if the damage or defect of the appliance is
caused by inappropriate treatment, over loading or installation mistakes. The Warranty
claim expires if there is any technical interference of a third party without an written
agreement. The purchaser has to present the sales slip in assertion-of-claims and has to
bear all charges of costs and risk of the transport.
Recipes
17
G
Please note:
Prepare food regarding to ´Tips for preparing the food` page 13.
WARNING: Do not push products into the feed chute with your fingers or foreign
objects. Always use the food pusher provided. Never use force.
ATTENTION: Never hold your face or other body parts over the feed chute when
the motor is running because little pieces of food could be thrown out of the feed
chute. Always put the food pusher into the feed chute before turning the appliance
on. Do not forget to remove the food pusher when filling food into the feed chute.
WARNING: Do not overload the food processing bowl. The normal processing bowl
has a max capacity of 2 litres. The mini processing bowl should not be more
then half-full and using the food collector the load should not be higher then
5 cm underneath the edge. Use smaller portions rather then overloading the
food processor.
40965_designfoodprozessoradvanced_manual_english.qxp 29.01.2008 12:19 Seite 17