beautypg.com

Gastroback 40965 Design Food Processor Advanced User Manual

Page 15

background image

1. Press the ´OFF` button, wait for the motor to stop completely, and unplug the
appliance from the power outlet.
ATTENTION: Never use force dissembling the appliance. The lid and the bowl are
securely locked during operation and can be released turning them clockwise. Take the
bowl off the motorblock before you remove the lid.
2. Take the lid off the processing bowl turning the lid counterclockwise.
Note: You will notice a solid grey arrow to the left of the hold-
ing lip on the lid, when taking the lid off the bowl this arrow
needs to align with the solid grey arrow on the handle of the
bowl (picture). Lift the lid to remove it.
3. Take the used disc or blade and the spindle out of the processing bowl.
WARNING: Warning: Use caution, as blades are sharp. Always handle the

processing blade by its central plastic section and the disc on the edges.
Note:
There are two holes in the variable slicing disc to ease disassembling. Put your fingers
through the holes and slightly pull the disc upwards to remove it. Pay attention not to cut yourself.
Important: For thoroughly cleaning take the spindle out of the blade or disc before cleaning.
4. Take the bowl of the motorblock by turning it counterclockwise.
5. Empty the processing bowl, using a plastic or wooden spoon or the provided spatula.
To avoid damage, do not scratch or scrape off the residues.
CAUTION: Do not pour boiling water in the processing bowl or immerse the processing
bowl in boiling liquids. Always handle the processing bowl with care to avoid cracks.
6. Clean the bowl, blades, discs and lid in warm dish-water using a nylon brush or soft
sponge. The cleaning water should be very clear; so that you can see the blades when
washing them. Ensure, not to touch the blades with your hands. The loose parts are
dishwasher safe and can be cleaned in the dishwasher. ATTENTION: The plastic parts can
tarnish in the dishwasher. Soak stubborn residues in warm dish-water for ca. 10 minutes,
before cleaning.
NOTE: Do not fill the bowl with boiling water or place any of the parts in boiling water.
Some foods, such as carrots, may temporarily stain the bowl. To remove stains, make a
paste of 1 tablespoon baking soda and two tablespoons warm water. Apply the paste
to the stains and rub with a cloth. Rinse in sudsy water and dry. Possibly, you can avoid
persisting discolouration by wiping the plastic parts with a little vegetable oil before
cleaning. Additionally, due to processing hard, rubbing food the processing bowl could become
dull in the course of time. This is normal and does not interfere with its functionality.
7. Wipe the motor housing and power cord with a damp soft cloth. Take care not to
spill or drip water or any other liquids on the motor housing.
8. Thoroughly dry the motor housing and all parts of the appliance after each cleaning.
Leave all parts dry naturally where they are out of reach of young children.

15

lock

40965_designfoodprozessoradvanced_manual_english.qxp 29.01.2008 12:18 Seite 15